Mason & Deck ME2MOGO Manual Del Propietário página 8

SAFETY & MAINTENANCE GUIDE (CONTINUED)
TROUBLESHOOTING GUIDE (CONTINUED)
PROBLEM POSSIBLE CAUSE
When the Cooler is new.
Odors.
Algae or mold due to
moist parts. In very damp
conditions, algae may
form.
The unit does
Damaged Control Panel
not
on unit.
respond.
The Air Cooler was placed
The outdoor Air outdoors (this is only
Cooler is wet allowed for outdoor Air
from rain. Cooler models) and
soaked by heavy rain.
SOLUTION
When the unit is used for the first time, the Honeycomb
Cooling Media will have an odor, which will dissipate
within a few hours of initial use.
Check the Honeycomb Cooling Media. If you see mold
spots on the media or suspect an algae issue, remove
and replace the Honeycomb Cooling Media. Contact
the Customer Service Center for more information.
Contact the Customer Service Center.
A small amount of rain on the unit is not a problem as
long as the electrical plug and outlet are dry. If they
are wet, DO NOT touch the unit or electrical plug/
outlet. Switch off the master power for the outlet before
unplugging the unit from the electrical outlet. Make sure
all outlets and plugs are dry before use.
The Air Cooler is designed to IPX4 product standards
and not recommended to be placed outdoors during
heavy rain conditions. Do not operate the Air Cooler
when wet. Wait for the Air Cooler to dry before plugging
in and turning on the unit again.
7 EN