Energy Saving - Brandt BFU584YNW Guía De Instalación Y Uso

Electrical Installation Tips
• Do not use extension cable or adapter or
power strip.
• Never remove the grounding.
• The socket must be easily accessible but
out of reach of children.
In case of doubt, ask to your installer.
Your device is compliant with EU directives
and their modifications.

ENERGY SAVING

To reduce the power consumption of your
appliance:
• Install it in a suitable location (see
"Installing your appliance").
• Keep doors open for as short time as
possible.
• Do not put hot food in your refrigerator
or freezer, particularly if they are soups or
preparations which emit a large amount of
steam.
• Ensure the optimal functioning of your
device by not letting accumulate too much
frost in the freezer (defrost it when the ice
thickness exceeds 5-6 mm) and
periodically cleaning the condenser (see
"Maintenance your device ").
• Regularly check the door seals and make
sure that they always close effectively. If
this is not the case, please contact service
after sales service.
• Do not let it set at too low a
temperature.
• Not fulfilling with drawers, bins and
shelves arrangement could lead to
increased energy consumption.
WARNING:
If the unit was shipped to home in a
horizontal position, place it vertically and
wait two hours before plugging it in. A
small amount of oil may have flowed into
the refrigeration circuit, you need to give it
time to flow back towards the motor
before connecting the appliance, otherwise
you may damage it.
Before any maintenance, disconnect the
power plug. Do not pull the power cable
but directly enter the profile.
CLEANING AND MAINTENANCE
 Before cleaning, unplug the appliance
and turn off the power.
 Do not clean the appliance with metal
objects, a steam system, volatile oils,
organic solvents or abrasives.
 Do not use sharp objects to remove ice.
Use a plastic scraper.
 To replace the light bulb, if operation is
possible by the user himself, please refer
to the "Maintenance" of this manual.
Always be sure to unplug your appliance
before.
WARNING: If the appliance is equipped
with a LED lighting, it can only be replaced
by a qualified technician
7
.