A-B. Position the wall track (B) as illustrated. Level the track (B) and mark the track holes positions.
C. Remove the track and drill pilot holes in the marked locations with a ø8 mm (5/16 in) drill bit.
D. If there are no studs located behind the wall track (B), then insert the wall anchors (AA) using a rubber mallet until the wall anchors are flush with the wall.
E. Replace and secure the track (B) with screws (EE). Do not overtighten.
A
30 mm[1 1/4 in]
B
B
C
ø8 mm
5/16 in
D
AA
WALL TRACK INSTALLATION
WARNING!
If there are no studs aligned to the wall track behind the
drywall, use the wall anchors to ensure the screws won't