Time And Status Display - KENMORE ELITE 796.8178 Manual De Uso Y Cuidado

HOW TO USE

TIME AND STATUS DISPLAY

The Time and Status Display shows the cycle time, cycle
progress, and vent status. When the dryer is turned on, the
display will illuminate.
D
B
A
TIME DISPLAY
When a cycle is selected, the display will indicate
the default time for that cycle including selected
options or adjustments. In AUTO DRY cycles, the
time remaining will be estimated and may change
during the cycle, depending on the condition of the
load. In TIMED DRY, the time displayed will be the
actual time remaining.
B
CHECK FILTER LIGHT
The CHECK FILTER light turns on before each load,
as a reminder to check the lint fi lter. Always clean
the lint fi lter before every cycle.
C
CYCLE STATUS INDICATORS
This portion of the display shows which stage of the
drying cycle is currently under way (DRY, COOL, or
WRINKLE GUARD).
C
D
CHECK VENT INDICATOR
(DUCT BLOCKAGE SENSING SYSTEM)
The CHECK VENT duct blockage sensing system
detects and alerts you to blockages in the ductwork
that reduce exhaust fl ow from the dryer. This light
does not indicate any problems with your dryer. If
this light blinks, it indicates that your home's exhaust
system has a serious restriction, which is not covered
by your dryer's warranty.
DAMP DRY SIGNAL
E
If you select DAMP DRY SIGNAL, the dryer chimes
when the clothes are just short of completely dry, in
case you want to remove them for ironing or hang
drying.
26
E A