Error Message List - Brother P-touch 1900 Guía De Usuario

Error Message
4 LINE
LIMIT!
BATTERIES
WEAK!
BUFFER
EMPTY!
BUFFER
FULL!
CAN'T
HERE!
CHANGE
ADAPTOR!
CUTTER
ERROR!
INVAL.
CHRS!
48

ERROR MESSAGE LIST

Cause
This message appears if four lines
already exist when you press r.
This message appears when the
installed alkaline batteries become
weak.
• This message appears if you hold
down c and press T, but
no text has been entered in the dis-
play.
• This message appears if you try to
print, but no text has been entered
in the display.
This message appears if you try to
enter a character, symbol, return or
space after the maximum number of
characters has already been entered.
This message appears if the cursor is
at the end of the text when you hold
down c and press O.
This message appears if a high-volt-
age adaptor is being used.
This message appears if the tape cut-
ter is closed when you try to print or
feed the tape.
This message appears if the cursor is
not below a number when you hold
down c and press O.
Remedy
Limit the number of lines to four.
Replace the batteries or use the
AC adaptor.
• Enter some text before starting
this function.
• Enter text before printing.
Delete some existing text so that
more text can be entered.
Move the cursor below a
number before holding down
c and pressing O.
Remove the high-voltage adap-
tor and connect the adaptor
designed exclusively for this
machine.
Turn the P-touch off, then on
again.
Move the cursor below a num-
ber before holding down
c and pressing O.