DURAVIT SensoWash Slim Manual De Instrucciones página 30

Problem
Rearwash / Ladywash
Switching
between the
Rearwash and
Ladywash takes
EN
too long.
The water spray
intensity is too
weak.
The water tem-
perature is not
warm enough.
The water tem-
perature is too
high.
The water spray
from the spray
wand suddenly
stops.
A jet of water is
not emerging
from the spray
wand.
26
Potential cause
When switching
between Rearwash
and Ladywash,
the spray wand
moves back then
forward again after
self-cleaning is
complete.
The water spray
intensity has been
set to "Low".
The water supply
hose has buckled.
The water tempera-
ture has been set to
"Off" or "Low".
The "Water tempe-
rature" has been
6
set to "High".
The function auto-
matically stops after
2 minutes.
The spray nozzle is
clogged.
Solution
This is normal.
> Adjust the "Water
spray intensity"
and / or to
3
"Medium" or "High".
> Contact your
installer.
> Adjust the "Water
temperature"
"Medium" or "High".
> Adjust the "Water
temperature"
"Medium" or "Low".
This is normal.
> Clean the spray
nozzle.
Ch.
6.2
2
6.2
to
6
6.2
to
6
7.2