Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
year intervals as part of the normal time switch maintenance
observing battery polarity markings when installing. No
other maintenance is required.
8. Place the slide switches in the AUTO and RUN position.
9. Reapply power to the time switch.
10. Press the recessed reset switch for at least two seconds.
The display will show 12:00 A.M. and MO. Note that the
days of the week are identified with the first two letters
of the day (MO for Monday). The timer is now ready for
programming. Refer to the examples which follow and
enter the scheduled events (set points) required. Assign
each of the 12 set points (EVENTS) entered to whichever
day or groups of days of the week you wish an ON or OFF
operation to occur.
Set Point = Event = ON = OFF
TIMER
POWER
1
2
3
4
NEUTRAL
LINE
≈
120
LOAD
LINE
EH10
Fig. 4
NEUTRAL
PROGRAMMING STEPS:
SET CURRENT DAY AND TIME
Slide switch to TIME SET. Push DAY until current day
shows, then push HOUR until current hour AM or PM
shows. Now push MINUTE until current minute shows.
Clock is now set. Follow same procedure after replacing
battery or changing time (such as for daylight saving time).
SET YOUR PROGRAM
Slide switch to PROG. Display will look like this: (-:- -)
• Press DAY until desired program period shows (see
choices in "PROGRAM PERIOD OPTIONS" section above).
• Press HOUR until desired "ON 1" hour shows
(that is, the first time each day of the program
period that you want the load to turn ON).
• Press
MINUTE
until
• Press
EVENT
to
(and to advance to programming for OFF 1).
• Press DAY again until all seven days of the
week
show
(or
until
period option shows; see "PROGRAM PERIOD
OPTIONS").
• Press HOUR again until desired "OFF 1" hour shows
(that is, the first time each day of the program
period that you want the devices to turn OFF).
• Press
MINUTE
until
• Press EVENT to set time for OFF 1. You may now begin
setting ON 2, a second ON time, for the same program period,
OR press DAY to change to a different program period.
• Repeat above procedure until all desired ON/OFF
programs are set.
PLEASE NOTE: Before you program your timer, or when you
remove the battery, or when you use the RESET, pressing
EVENT will display the bar symbol -:-- ON 1. Repeated
pressing of EVENT will display all the way through the final bar
symbol -:-- OFF 6. Once you program your timer, however,
each actual time setting you make will replace the bar symbol.
While programming, each time you press EVENT you will
advance to the next EVENT.
PROGRAM PERIOD OPTIONS:
Your timer gives you up to 6 different ON and 6 different OFF
settings per program period. You can use all 6 settings per
period, or as few as you like. A program period covers one of
these:
• ALL 7 DAYS OF THE WEEK combined into one - display
shows: MO TU WE TH FR SA SU.
• MONDAY THRU FRIDAY combined into one -
display shows: MO TU WE TH FR.
• SATURDAY AND SUNDAY combined into one -
display shows: SA SU.
TIMER
POWER
2
3
4
5
6
1
LINE 1
LINE 2
≈
240
LINE 1
LINE 2
EH40
LOAD
Fig. 5
desired
minute
shows.
program
time
for
ON
another
desired
program
desired
minute
shows.
• EACH INDIVIDUAL DAY OF THE WEEK -
display shows only that day.
• BLANKDAY
follows Sunday after last push of DAY button (when
the lower slide switch is set at PROGRAM). The
purpose of the BLANKDAY is to disable a program
setting on a day.
Program periods with days "combined into one" help
you make settings for those multiple days quickly and
conveniently while using only one ON/OFF pair. When you
set such a program period, all settings will be identical for
every day of that period.
PERSONAL PROGRAM EXAMPLES
DAY CHECKS
EXAMPLE 1
MO TU WE TH FR SA SU
EXAMPLE 2
MO TU WE TH FR
SA SU
EXAMPLE 3
MO TU WE TH FR
MO TU WE TH FR
SA SU
EXAMPLE 4
MO TU WE TH
FR SA
SU
NOTE: "-:- -" follows Sunday after last push of DAY button
(when the slide switch is set at PROG). The purpose of the
-:- - is to cancel a program setting on that day.
REVIEW YOUR PROGRAM
Slide switch to PROG. Press EVENT button to advance
display to each ON or OFF setting. Check days and times
displayed. To make a change, follow instructions under
"SET YOUR PROGRAM". To delete a displayed set point,
press DAY button until "-:- -" is displayed.
GENERAL FEATURES AND HINTS FOR TROUBLE
FREE USE
• BUTTON: When you press a button, there is an advance
of one time unit; holding a button down advances
continuously until released.
• MAINTENANCE: With the exception of battery
1
replacement at 2-3 year intervals, your Intermatic timer
is maintenance-free.
• AFTER THE INSTALLATION IS COMPLETED, THE
LOCKABLE HASP SHOULD BE MOVED TO THE UP
POSITION TO ENGAGE THE COVER WHEN IT IS
CLOSED.
If within the warranty period specified, this product fails due to a defect in material or
workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of
charge. This warranty is extended to the original household purchaser only and is not
transferable. This warranty does not apply to: (a) damage to units caused by accident,
dropping or abuse in handling, acts of God or any negligent use; (b) units which have been
subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used
in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed
lamps and/or lamp bulbs, LED's and batteries; (f) the finish on any portion of the product,
such as surface and/or weathering, as this is considered normal wear and tear; (g) transit
damage, initial installation costs, removal costs, or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU
OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED
IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE
WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from
whom the unit was purchased or (b) completing a warranty claim online at www.
intermatic.com. This warranty is made by: Intermatic Incorporated, Customer Service
7777 Winn Rd., Spring Grove, Illinois 60081-9698. For warranty service go to: http://
www.intermatic.com or call 815-675-7000.
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081-9698
- 2 -
EXPLANATION
-
EVENTS
ON TIMES
OFF TIMES
DISPLAYED
DAYS & TIMES DISPLAYED
5:00 PM
10:00 PM
ON 1
MO TU WE TH FR SA SU 5:00 PM
OFF 1
6:00 PM
10:00 PM
ON 1
MO TU WE TH FR
OFF 1
MO TU WE TH FR
4:00 PM
8:00 PM
ON 2
SA SU
OFF 2
SA SU
6:00 AM
9:30 AM
ON 1
MO TU WE TH FR
OFF 1
MO TU WE TH FR
5:30 PM
11:15 PM
ON 2
MO TU WE TH FR
OFF 2
MO TU WE TH FR
3:00 PM
10:00 PM
ON 3
SA SU
OFF 3
SA SU
8:00 PM
11:30 PM
ON 1
MO TU WE TH
OFF 1
MO TU WE TH
5:00 PM
2:20 PM
ON 2
SU
(DAY AFTER)
OFF 2
SU
7:00 PM
10:30 PM
ON 3
FR
OFF 3
MO
ON 4
SA
OFF 4
TU
ON 5
"BLANKDAY"
OFF 5
WE
ON 6
"BLANKDAY"
OFF 6
TH
LIMITED ONE-YEAR WARRANTY
"BLANKDAY"
6:00 PM
10:00 PM
4:00 PM
8:00 PM
6:00 AM
9:30 AM
5:30 PM
11:15 PM
3:00 PM
10:00 PM
8:00 PM
11:30 PM
7:00 PM
10:30 PM
5:00 PM
11:30 PM
5:00 PM
11:30 PM
-:- -
11:30 PM
-:- -
11:30 PM
Publicidad
Tabla de contenido
