Function Control - AccuBANKER AB-5000 MG/UV Manual De Usuario

Function Controls
Restart Button
Used to initiate or reinitiate a counting
operation, or to clear an error message shown
on the display.
Keypad
This is a set of numerical keys (0-9) used to
preset optional batch groups (up to 3 digits).
Clear Button
Used to remove the selected batch count on
the Batch Number Display.
MNL (manual) Button
Used to select the auto starting or the MNL
(manual) starting mode.
Add Button
Used to select or clear the Add function.
Banknote Physical Condition Selector
This button sets the bill counter sensors to
three different levels, according to how dark or
light is the ink on the bills to be counted. (For
more information, refer to the Operation
section, point 2).
Banknote Physical Condition Level Indicator
Bar
A fixed bar indicates the three available levels
in the Banknote Physical Condition Selector.
Batch Function Button
Every time this button is pressed, one of the
preset quantities (10, 20, 25, 50, 100,“blank”) will
be indicated rotationally on the Batch Number
Display.
DD Key (Different Denomination)
This button activates a function that detects
any change in the size of the bills and selects
the detection sensitivity.
UV Detection Button (ultraviolet)
This button activates the UV detection
mechanism. This system detects counterfeit
bills by means of UV fluorescence.
MG Detection Button (magnetic)
This button activates the magnetic detection
mechanism. This system detects counterfeit
bills by verifying magnetic features embedded
in the notes.