Inicio sobre la red con un servidor SPARC Blade
local-mac-address
phy-type
reg
version
1.2 09/01/14
board-model
model
compatible
address-bits
max-frame-size
network-interface-type
device_type
name
fcode-rom-offset
interrupts
cache-line-size
class-code
subsystem-id
subsystem-vendor-id
revision-id
device-id
vendor-id
Escriba device-end y luego ejecute netboot.
7
{0} ok device-end
{0} ok /pci@400/pci@0/pci@9/pci@0/pci@1/network@0:dhcp
{0} ok boot /pci@400/pci@0/pci@9/pci@0/pci@1/network@0:dhcp
Si lo ha realizado correctamente, debería ver algo parecido a lo siguiente en la consola del balde.
Boot device: /pci@400/pci@0/pci@9/pci@0/pci@1/network@0:dhcp File and args:
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
NOTICE: hxge1: link up, 10000 Mbps, full duplex
Configuring devices.
Using DHCP for network configuration information.
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file /sysidcfg
Search complete.
68
Guía del usuario de Network Express Module virtualizado de varias conexiones para Sun Blade 6000 M2 10GbE
• Julio de 2010
82520018 00000000 10400000 00000000 00008000
82520020 00000000 00000000 00000000 00008000
82520030 00000000 10600000 00000000 00200000
00 14 4f 63 00 09
xgf
00520000 00000000 00000000 00000000 00000000
03520010 00000000 00000000 00000000 01000000
03520018 00000000 00000000 00000000 00008000
03520020 00000000 00000000 00000000 00008000
02520030 00000000 00000000 00000000 00100000
Sun Blade 6000 Virtualized Multi-Fabric 10GbE NEM FCode
501-7995-04
SUNW,pcie-hydra
pciex108e,aaaa.108e.aaaa.1
pciex108e,aaaa.108e.aaaa
pciex108e,aaaa.1
pciex108e,aaaa
pciexclass,020000
pciexclass,0200
00000030
00002400
ethernet
network
network
00006200
00000001
00000010
00020000
0000aaaa
0000108e
00000001
0000aaaa
0000108e