TROUBLESHOOTING
PROBLEM
Burner won't light
Burner flame is low
Carbon build-up
Thick black smoke
POSSIBLE CAUSE
Propane cylinder is frosted over
Blockage in orifice
Control knob is not in ON position
Gas pressure is low
Outdoor temperature is less than
than 40ºF / 4ºC
and tank is less than 1/4 full
Control knob fully ON
Dirt or film on ignition screen
Blockage in burner
Wait until the propane cylinder
warms up and becomes unfrosted
Clear blockage
Turn control knob to ON
Turn cylinder valve OFF and replace
cylinder
Use a full cylinder
Check burner and orifices for blockage
Clean ignition screen
Remove blockage and clean burner
inside and outside
22
CORRECTIVE ACTION