Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
About This Guide
The ÉPIX Strip IP Quick Reference Guide (QRG) has basic product information such as connection and mounting.
Download the ÉPIX Drive 2000 IP User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
•
DO NOT open this product. It contains no user-serviceable parts.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
•
DO NOT look at the light source when the product is on.
•
CAUTION: This product's housing may be hot when lights are operating.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
•
CAUTION: This product's housing may be hot when lights are operating.
•
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
•
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
•
USE a safety cable when mounting this product overhead.
•
DO NOT submerge this product (IP65). Temporary outdoor operation is fine.
•
When using this product in an outdoor environment, use IP65 (or higher) rated power and data cables. Be sure to
secure unused power and data ports with attached IP65 covers.
•
DO NOT operate this product if the housing, ports, or cables appear damaged.
•
DO NOT connect this product to a dimmer or rheostat.
•
ONLY connect this product to an ÉPIX Drive 2000 IP.
•
Only use the hanging/mounting bracket to carry this product.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact your distributor to request support or return a
product. Visit
www.chauvetprofessional.com
What is Included
•
ÉPIX Strip IP
•
Square Milky Filter (Installed)
•
Black Stealth Filter
•
Round Milky Filter
•
Warranty Card
•
Quick Reference Guide
1
QUICK REFERENCE GUIDE
www.chauvetprofessional.com
for contact information.
for more details.
ÉPIX Strip IP QRG Rev. 2
Publicidad
Tabla de contenido
