Track Adapter - Chauvet DJ EVE TF-20 Guía De Referencia Rápida

EN

Track Adapter

Before mounting this product, read the
1. Cut the power cable, leaving 1.5 feet for maneuverability.
2. Strip enough of the cable and wires to allow for splicing.
3. Dismantle the Track Adapter:
120 VAC
230 VAC
4. Pass the cable through each piece and the mounting bracket, as shown in the diagram below.
120 VAC
3
QUICK REFERENCE GUIDE
Safety Notes. To splice the included Track Adapter onto the EVE TF-20:
Remove
2 Screws
Assembly
Remove 2 Screws
230 VAC
Pull
Out
Remove Cover
Washer
EVE TF-20 QRG Rev. 2