Setup (Windows Environment) - Kingston Ironkey D300 Manual Del Usuario

Setup (Windows Environment)

1. Insert the D300 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
• Windows users will receive a device driver
notification as seen in
Once the new hardware detection is complete,
Windows will prompt you to begin the initialization
process.
• Windows users will see an AutoPlay window
similar to the one in
2. Select the option '
If Windows does not AutoPlay, you can browse to
the CD-ROM partition (
execute the IronKey program. This will also start the
initialization process.
Figure 2.3 – D300 Contents
Document No. 48000130-001.A00
.
Figure 2.1
.
Figure 2.2
'.
Run IronKey.exe
) and manually
Figure 2.3
Figure 2.1 – Found New Hardware
Figure 2.2 – AutoPlay Window
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. AutoRun will start the
initialization process automatically.
D300
)
Page 4 of 27