LG WM20WV26 Manual Del Propietário página 64

EN 14
INSTALLATION
2.
Check if the appliance is perfectly level using a
spirit level (
1
).
• When pushing down the edges of the top
plate diagonally, the appliance should
not move up and down at all (check both
directions). If the appliance rocks when
pushing the machine top plate diagonally,
adjust the feet again.
3.
Secure the adjusting feet with the lock nuts
( ) by turning anti-clockwise against the
bottom of the washing machine.
4.
Check if all lock nuts at the bottom of the
washing machine are secured properly.
NOTE
• Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
• The washing machine must be 100% horizontal
and stand firmly in position.
• It must not 'Seesaw' across corners under the
load.
• Do not let the feet of the washing machine get
wet. Failure to do so may cause vibration or
noise.
Using Anti-Slip Sheets (*)
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect leveling may cause malfunction
through noise and vibration. If this occurs, install
the anti-slip sheets under the leveling feet and
adjust the level.
1.
Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2.
Adjust the level after placing the appliance in
the installation area.
3.
Place the adhesive side (
sheets on the floor.
• The most effective way is to install the
anti-slip sheets under the front feets. If it is
difficult to place the sheets under the front
feet of the appliance, attach them under
the rear feet.
) of the anti-slip
1