Power On/Off Switch; Initial Setup; Advanced Operation - Klip Xtreme BluWave KWS-615 Guia Del Usuario

1. Source switch: use it to toggle between the auxiliary and Bluetooth input modes. It also enables
the Bluetooth pairing mode. The LED glows blue when the wireless Bluetooth mode is selected. This
LED turns red when the 3.5mm mode, the SD or USB ports are enabled.
2. Play/Pause button: press it to play or pause media
3. Previous track/ Next track: use these buttons to navigate your playlists
4. Status LED: blue LED turns on when the device is on Bluetooth mode. It switches to red when
the auxiliary input mode is enabled.
5. Volume control: raises or lowers the audio level
6. Bass control: adjusts the tone level of low frequency sound range
7. USB port: allows music playback from a USB storage device
8. SD card slot: allows music playback from an SD memory card
9. Audio input: here is where you connect external audio devices fitted with a 3.5mm stereo
output for wired playback
10. Audio output: for left and right satellite speakers
11.

Power on/off switch

12. AC cable
V. Initial setup
1. Start by connecting the satellite speakers by inserting the left (red) and right (white) satellite
speaker plugs into the matching output jacks on the back of the main unit
2. If using a wired connection with the speakers, plug the green tip of the supplied cable into the
output port of your audio device. Then insert the other end of the RCA
connector into the green input jack found on the back of the subwoofer.
3. Plug the AC cable into the wall outlet. After making sure all connections are done
correctly, power the system by turning on the main switch.
VI. Advanced operation
Note: Before installing this product, please make sure your device has the built-in Bluetooth feature
available. If your device is not Bluetooth-enabled, you must purchase a Bluetooth dongle, preferably
version V.2.1 or above.