1. Pull outward on the (3) climate control knobs and
remove. (Figure A)
2. Remove (2) Phillips screws from behind the outer
two climate knobs. (Figure B)
3. Unsnap and remove the trim pieces on each side
of the climate control/ashtray/pocket assembly.
(Figure C)
4. Remove (2) Phillips screws from the bottom of the
climate control/radio trim panel and unsnap and
remove the entire panel. (Figure D)
5. Remove (4) Phillips screws to remove the
factory radio.
6. Remove factory brackets from radio. Retain
brackets for use during kit assembly.
Continue to kit assembly
Dash Disassembly 95-8202
Scion XA 2004-2006
(Figure A)
(Figure B)
13
(Figure C)
(Figure D)