Unitec MAB 525 Instrucciones De Manejo página 8

Sa f e t y
El e c t r i c s h o c k h a z a
8
■ Do not leave the machine unsupervised during operation .
■ Store the machine in a dry, temperate location out of the reach
of children .
■ Do not leave the machine standing outdoors and do not
expose it to moisture.
■ Make sure that your work area is sufficiently lit (>300 Lux).
■ Do not use low power machines for heavy working .
■ Make sure that your workplace is clean .
■ Keep the machine clean, dry and free of oil and grease .
■ Follow the instructions on lubricating and cooling the tool .
r d
D ANGER
D a n g e r t o l i f e b y e l e c t r i c s h o c k !
C o n t a c t w i t h l i v e w i r e s o r c o m p o n e n t s c o u l d l e a d t o
s e r i o u s i n j u r y o r e v e n d e a t h !
Observe the following safety precautions to avoid electric
shocks:
► Do not open the housing of the machine . Risk of electric
shock if live terminals are touched .
► Never immerse the machine or the plug into water or other
liquids .
► Use only extension leads or cable drums with a cable cross-
section of 1 .5 mm² .
► Only use extension leads that are approved for the place of
work .
► Check the condition of the extension lead regularly and
replace if damaged .
► Avoid direct body contact with grounded parts (e .g ., tubes,
radiators, steel girders) to reduce the risk of electric shock in
the event of a defect .
M AB 5 2 5