Hanging The Chimney Wall Hood - Thermador HPCN36WS Manual De Instrucciones

Hanging the Chimney Wall
Hood
The transition supplied with the hood connects to
standard 10-inch round duct. Installations require a cutout
in the ceiling to accommodate 10" (254 mm) duct and the
1/2'' (13 mm) conduit carrying power to the unit.
Chimney extensions, sold separately, are available to
cover the space between the top of the hood and ceiling
(see "Chimney Extension Installation (optional)" on
page 20).
7¾"
(197)
Option Option
16"
(406)
24"
(610)
*Follow cooking appliance manufacturer's recommendations.
Page. 15
C L C L
6½" 6½"
(165) (165)
18"
(457)
* 30" (762) – * 30" (762) –
40" (1,016) 40" (1,016)
inches (mm)
1. Use a T-20 Torx head screwdriver to remove the screw
securing the junction box channel covering the wires.
2. Remove one circular knockout behind junction box
channel.
3. Using two people to lift, rest the hood on the wood
bracket. Make sure the wood bracket fits into the
recess on the back of the hood.
4. From inside the hood, pre-drill the holes labeled "J"
in hood into the wood bracket with a 5/8'' (16 mm)
drill bit. Secure the hood to the wood bracket with
five (5) 1½'' (38 mm) screws.
5. Connect additional ducting.
J