Publicidad
Idiomas disponibles
Idiomas disponibles
How To Replace The Stylus
Removing old stylus
1. Set a screwdriver at the tip of the stylus and push down to the
direction "A".
2. Remove the stylus by pulling it down and forward.
Installing a new stylus
1. Hold the tip of the stylus and insert the other edge by pressing in the
direction "B".
2. Push up in the direction "C" until it locks at the tip.
Listening to a Record
1. Connect the AC power cord to the mains,
the standard is 230V-50HZ.
2. Plug the other ends of the RCA Cable into
the auxiliary input (Aux) on your TV, home
entertainment receiver or other music
system, be sure that the red RCA Cable is
inserted into the red jack and the white RCA
Cable is inserted into the white jack.
3. Switch on the turntable.
4. Put a record onto the turntable, when
playing the 45rpm record, remember to use
the adapter which is packed in the poly bag
along with the manual.
5. Select player speed according to the record
you playing.
6. Remove the tone arm-rest holder, lift the
que-lever and move the tone arm gently to
the desired position over the record, lower
the que-lever slowly, then the record is
playing.
7. Turn on the unit which you connected with
this USB turntable by using the On/off knob
or Volume knob, adjust the volume knob to
control the volume of the music.
8. Press STOP button to stop playing.
9. Press the PLAY button to continue playing.
10. When the music has fi nished, the tone-arm
will slide back to the arm rest automatically.
Or you can press the eject button when
playing the record, the tone arm will depart
from the record and then back to the arm-
rest.
11. Remember to unplug the plug when not
using the unit.
USB Jack
3
Guide Pinx (inside)
Line Out
Publicidad
