Installation
C
Reconnect the water hoses (applicable models only)
Once the refrigerator has passed through the entrance, reconnect the water hoses and
insert the provided clips (x2) to tighten the coupler.
B
A. Center of transparent coupler
B. Clip A (1/4") (6.35 mm)
34
English
Untitled-4 34
5. Remove the upper hinges (C) on both
6. Gently lift up the doors one by one to
A
• Make sure the water hoses are
• To prevent water leaks, each water
sides.
remove. Use caution as the door may
fall off or over.
CAUTION
connected with matching colours.
hose must be inserted fully to the
centre of the transparent coupler and
then must be clipped.
2017-07-12
3:06:55