Mark MF 1505 UP Manual De Uso página 8

EN
2. How to release "low -fluid protection "
When the machine is under the protection of low fluid, after refill ing the fluid, there are t hree ways
to release the protection.
a). Keep pressing the one board red fog button until the fog liquid fill the tube completely, then the
machine would exit low -fluid protection.
b). Under the wireless remote control, keep pressing any buttons until the fog liquid fill the tube
completely, then the machine would exit low-fluid protection.
c). Under the DMX control, firstly push the slider of channel one to the value below 10(Fog OFF),
then push the slider up to value above 10(Fog ON), the machine would exit low fluid protection
by doing so.
Technical specification
●
Voltage : AC100~120V,AC220~240V/50Hz -60Hz
Power : 1500W
Heat up time : : 4min
Tank capacity : 2.5L
N.W. : 8.7Kg
G.W. : 9.6Kg
Size : 510X375X250 mm
MF 1505 UP - 6 -
Elements
●
1. 21 LEDs 3W each
(Nozzle)
2.
(Handle)
3.
(3-pin DMX socket)
4.
(Digital display)
5.
(hanging ring)
6.
(fog button)
7.
(5-pin DMX socket)
8.
(Power socket)
9.
(Power switch)
10.
(Fixed plate)
11.
(Oil Tube)
12.
(Oil container)
13.
14. (Wind inlet)
User Manual/Manual de Uso