Lockncharge Carrier 40 Cart Instrucciones De Uso página 4

Carrier 40 Cart
STEP 2 - Routing the device cables and connecting devices.
Install the power adaptors into the power strips.
Route the device cables through the channel
opening one at a time.
Pull the cable out to the desired length. Repeat for
the remaining device power adaptors and cables.
Replace the plastic baskets and insert the devices.
Connect the device cables, adjusting length as
required
Tidy cables using supplied velcro cable ties.
Feed the cable through Gripweld and slide along.
Evenly space the device cables along the cart.
Replace the shelves at the desired height (3 levels).
Install the mat.
Connect the power cord and switch on at the wall
socket. Read the instructions for operating the
ECO Safe Charge power management unit.