Replacement Of Parts; Use And Functioning; Description Of Controls - Diamond AD2N/H2G-R2 Manual De Instalación, Uso Y Mantenimiento

ENGLISH
4.5.

Replacement of Parts

!
Before carrying out any replacement
intervention,
devices.

In particular, deactivate the electrical power
supply using the differential disconnecting switch.
When worn components must be replaced, only
use original spare parts.
GB
5.

USE AND FUNCTIONING

5.1.

Description of Controls

ON ... OFF Key
Pressing the ON/OFF key makes the controller
switch-on. Press the key for 2 consecutive
seconds to switch off the controller.
SET Key
Pressing this once during normal operation allows
you to set the working setpoint.
Defrost Key
activate all envisioned

All responsibility is declined for injury to
persons or damage to components deriving from
safety
the use
interventions which could modify the safety
requisites,
manufacturer.
Pressing this key once during normal operation,
allows you to start manual defrost.
Light Key
Pressing this key once during normal operation,
allows you to turn the light on and off.
Pressing these keys during setpoint programming,
parameters and humidity increases or decreases
the selected value.
6
of non-original spare
without authorisation
Increase ... Decrease Key
parts and
of the