LEGRAND adorne AUDM Manual De Usuario página 6

SpeAKer operAtIoN:
Turn on your speaker system
Turn up speaker volume
Turn down speaker volume
Connect a BLUeTOOTH
the speakers
Note: Some BLUetooth devices
require a password to accept.
When the 3.5 audio cable is
used, BLUetooth access is
disabled.
Charge your device via USB
connection
Listen to music with 3.5mm
audio cable
Turn ON/OFF Switch on both speakers to "ON" –
Indicator light will glow.
Press the "+" button.
Press the "-" button.
device to Prepare your BLUeTOOTH enabled product to
®
search for available devices. Press the "+" and
the "-" button on the Control Speaker together
and hold for five seconds, until the indicator
light on the Control speaker begins to flash. Use
your Phone or MP3 player to search for available
devices. Speaker is listed as "adorne Modular
Music". Select to pair and connect. You are now
ready to send music wirelessly to your speakers.
The Control Speaker can charge your device using
the USB connection. Place onto cradle. Make sure
connector plugs into base of device. If you have an
Apple
If you have a micro USB type device you will need
to provide your own cable. View "Configuring the
Speaker" section on how to install cables.
The USB charger supplies 5V at 1.5 Amps.
If you do not have a wireless device, you can
connect to the speaker using the included 3.5mm
audio cable.
device, use the provided USB/Apple
®
6
cable.
®