HumanCentric 101-1007 Manual De Instrucciones página 2

STEP 1
Expose Mounting Screws
NOTE: This is the hardest part!
Search YouTube for "remove
iMac base" for some helpful
videos.
In order to access the
screws that attach your
display to the stand,
you will need to use
the included plastic
card to release a latch
inside the display.
1.
Rotate the display
forward until it won't go
any further, then hold it
in place.
2.
Insert the plastic card into the space directly above the stand at a slight
upward angle. The latch is about ¾" inside the opening, so if it goes in
farther you're aiming too low. Take the card out and try again.
3.
While pushing the latch in as far as it can go, rotate the display forward to
expose the eight screws that attach the base to the display. Rotate the
display forward as far as it can go to lock it in place.
3a
1
3b
2
2