Troubleshooting; Chart Of Medical Device Symbols - Sunoptic Surgical LED-3000 Manual De Usuario

11.

TROUBLESHOOTING

Problem
Main switch power
indicator (refer to 4.1) is not
lit when switched on.
The power indicator is lit,
but lamp is still off.
12. CHART OF MEDICAL DEVICE SYMBOLS USED
LIT195 SUNOPTIC SURGICAL
(English)
Solution
Check that the AC power cord is properly connected.
Check the unit fuses. If necessary, replace.
Press Stand-by switch to turn on the LED.
Increase the LED intensity.
Manufacturer
Date of manufacture (YYYYMM or YYYY)
"Authorized Representative" in the
European Community
Caution, consult
documents
Caution: Federal law restricts this device
to sale by or on the order of a licensed
healthcare practitioner
Consult Instructions for Use
CE mark
®
accompanying
Rev. C
Date of Revision:9/15/15
Page 12 of 78