morse Metal Devil NXT Manual De Seguridad E Instrucciones página 4

IMPORTANT SAFETY INFORMATION
WHILE OPERATING THE SAW
• Always use the safety glasses and hearing protection provided, or their
equivalent, when using this saw. A ying chip could cause blindness.
Cutting noise could seriously impair hearing.
• Never use the tool without the original protection guard system. Ensure that
moveable guards operate freely without restrictions.
• Do not try to defeat any safety device. Do not lock the moving guard in the
open position.
• Ensure that the cutting depth adjustment handle/angle adjustment handle and
parallel blade guide are rmly xed while using the tool.
• Support the work piece properly. Never hold the work piece in your hand or put
it across your legs.
Always use both hands to operate the saw. Keep hands out of path of blade.
•
• Never reach around, under or behind the saw blade when operating the
machine. The guard cannot protect your hand if you do so.
Do not touch the blade while it is in motion. Do not try to stop the blade by
•
lateral pressure on the blade.
Never reach for a saw blade until the blade has completely stopped rotation
•
and the machine has been disconnected from the power source.
• When cutting wood, use suitable dust extraction and breathing apparatus.
• Remove the plug from main power supply before replacing the blade,
making adjustments or performing other maintenance work.
• Always keep the power cord away from the moving parts of the tool.
• Do not operate in damp or wet conditions or areas – electric sparks may occur.
You could suffer serious injury, or death from electrocution, burns or electrical
shock.
• In case of saw jamming, immediately switch off the saw and disconnect the plug.
Remove the saw from the material and inspect the blade for damage.
• Use only the flanges and washers that are supplied with the tool. Replace them
with original (OEM) replacement parts if they become damaged or scored.
• When storing the tool, switch off the motor, unplug the cord from the power
source and ensure that all moving parts have come to a complete stop.
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE!
3