Leds; Option Buttons - Indesit WIXXL 86 Manual De Instrucciones

LEDs

The LEDs provide important information.
This is what they can tell you:
Delay set:
If the Delay Timer option has been enabled (see page
7), once you have started the programme, the LED
corresponding to the delay set will begin to flash:
As time passes, the remaining delay will be displayed,
and the corresponding LED will flash:
Once the set delay is complete, the flashing LED will
turn off and the programme set will start.
ON-OFF / DOOR LOCK LED:
If the LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages,
wait for the LED to flash before you open the appliance door.
! The rapid flashing of the ON-OFF/DOOR LOCK LED together with the flashing of at least one other LED indicates
there is an abnormality. Call for Technical Assistance.
Cycle phase under way:
During the wash cycle, the LEDs gradually illuminate
on to indicate the cycle phase under way:
Prewash
Wash
Rinse
Spin cycle
Note: during draining, the LED corresponding to the
Spin cycle phase will be turned on.

Option buttons:

The OPTION buttons also act like LEDs.
When an option is selected, the corresponding button
is illuminated.
If the option selected is incompatible with the
programme set, the button will flash and the option
will not be enabled.
If you set an option that is incompatible with another
option you selected previously, only the last one
selected will be enabled.
GB
5