Filling The Tray With Water - Sima Bali 700 MKNO Manual De Instrucciones Original

9. Install the ruler on the cutting surface.
10. Install the tool holder.
11. Mount the blade.

9.2 FILLING THE TRAY WITH WATER

BALI MKNO cutters are designed to work with water-cooled diamond chains, so that a significant part of its structure is
a tray designed to serve as a reservoir of cooling water which is pumped in closed circuit to the blade.
WARNING: Before connecting the machine to the network to begin
any cutting operation should proceed to fill the tray to the level
sufficient to cover the pump completely
During cutting operations accumulate lots of dirt on the tray so the water should be changed as often as necessary to
ensure the smooth operation of the pump and the perfect cooling of the blade, the tray features a drain plug that
facilitates this operation.
WARNING: Do not forget to wash the pump at the end of each day. To do this, unscrew the circular
battery, immerse the pump in a bucket of clean water, plug the machine and circulate the water until fork
clean water for cooling, disconnect the machine and screw back the cap to the pump .
12
ENGLISH