Technical Specifications - EINHELL HP 1500 Instrucciones De Uso

1244-Heißluftpistole HP 1500 06.11.2001 9:30 Uhr
Before starting operation, be Do not use the unit near easily
sure to read the operating and flammable or explosive sub-
safety instructions! stances or gasses.
Never block the hot air flow by
plugging or covering the air flow
exit.
Diagram of the
Use only original accessory and
hot air pistol HP 1500:
replacement parts from the
1 nozzle
manufacturer.
2 model name-plate
Do not wear loose clothing or
3 2 level ON/OFF switch
jewelry. Wear slip-resistant
level 1: 300°C / 280 l/min
shoes and wear a hair net for
level 2: 500°C / 480 l/min
long hair. During operation main-
4 suspension shackle
tain a secure footing.
5 power supply cord
Never use the unit in wet surro-
Attention:
undings or in areas with high
Fire hazard during use!
humidity (bathroom, sauna, etc.).
Check your work area for easily
flammable substances and mate-
rials before using the hot air

Technical specifications:

pistol.
Never carry the hot air pistol by
Nominal voltage: 230 V ~ 50 Hz
the power supply cord.
Only use extension cords with a
Capacity : 1500 watt
minimum cross-section area of
1 mm
Temperature: 300°C / level 1
Repairs (for example power sup-
500°C / level 2
ply cord replacement) should be
performed only by a qualified
Air quantity: 280 l / level 1
electrician.
480 l / level 2
Do not use chemical paint remo-
vers or solvents at the same time
as the hot air pistol.
Clean the nozzle when soiled.
Safety Instructions:
Be sure that the openings for air
entry and exit are always clean
Before plugging in the power
supply cord, be sure that the and free of dirt.
Hazardous or poisonous gasses
ON/OFF switch is in the central
position. can be freed when removing
paint. Be sure to provide ade-
The nozzle reaches temperatu-
res of up to 600°C. Fire hazard! quate ventilation while working
indoors.
Wear protective gloves and
Never point the hot air directly at
eye wear. The nozzle should
not be touched during opera- windows or other glass surfaces.
tion.
Allow the hot air pistol to comple-
tely cool before putting away.
Never expose the unit to rain or
Start of operation:
moisture. Store the unit in a dry
place. Be sure that the power supply vol-
Do not leave the unit unattended. tage matches that printed on the
Keep out of reach of children. model name-plate (2).
Never direct the air flow at Choose the desired temperature
people or animals. Do not use and air quantity with the ON/OFF
the unit to dry clothing or hair. switch (3). The hot air pistol rea-
Do not use the hot air blower ches the working temperature
as a hair dryer. within one minute.
Seite 5
Left switch position:
1st level 300°C / 280 liter/min
Middle switch position:
Unit is turned off.
Right switch position:
2nd level – 500°C / 480 liter/min
Pay attention to the immediate
surroundings of the nozzle!
Fire hazard!
Possible uses for the hot
air pistol:
1. Removal of paint and lacquer.
Attention! Hazardous or poiso-
nous gasses may be produced
while removing paint or lac-
quer. Be sure to provide ade-
quate ventilation.
2. Removal of stickers and decora-
tions.
3. Loosening of rusted or tightly
fastened nuts and metal screws.
2 .
4. Thawing of frozen pipes, door
locks, etc. Attention: no not
attempt to thaw plastic or synthe-
tic pipes.
5. Accentuation of natural wood
grains before staining or
lacque-ing.
6. Shrinkage of PVC packaging
foils and insulation tubes.
7. Waxing and de-waxing of skis.
.
Maintenance:
Always keep the openings for air
entry and exit clean and free of dirt.
Clean the hot air pistol with a damp
cloth and a household cleaner. Do
not clean with solvents.
GB
5