Descargar Imprimir esta página

Cleaning And Maintenance; Cleaning The Pre-Filter; For Best Performance - HoMedics TotalClean AP-T20 Manual De Instrucciones E Información Sobre La Garantia

Ocultar thumbs Ver también para TotalClean AP-T20:

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING AND MAINTENANCE

CLEANING THE PRE-FILTER

TO CLEAN THE OIL TRAY

FOR BEST PERFORMANCE:

NEVER use water or any household cleaners or detergents to clean the HEPA-type filter.
Clean off the outside of the unit with a soft, dry cloth as needed.
NEVER use water, wax, polish, or any chemical solution to clean the outside of the unit.
Clean off the grille cover using a soft, damp cloth or the brush attachment of your vacuum as needed.
Vacuum the pre-filter monthly under normal usage conditions.
Replace the HEPA-type filter every 12 months under normal usage conditions.
Always use a genuine HoMedics replacement filter for optimal performance.
NOTE: For best performance, vacuum the pre-filter once a month under
normal usage.
1. Unplug the air purifier.
2. Remove the HEPA-type filter as described in the Replacing the HEPA-Type
Filter section.
3. Vacuum the outside of the HEPA-type filter using the brush
attachment of your vacuum cleaner, cleaning it thoroughly.
4. Place the HEPA-type filter back into the air purifier and close grille.
5. Plug the power cord into a standard AC outlet.
Open the oil tray and remove the pad. Essential oil pads should be
changed when switching to a different essential oil scent. If continuing to
use the same scent, set the essential oil pad aside for reuse. Wipe down
the inside of the oil tray with a soft cloth. Place the essential oil pad back
in the tray and close.
NOTE: Leave the essential oil pad out of the oil tray when storing.
11

Publicidad

loading