Cleaning And Maintenance - HoMedics AR-25 Manual De Instrucciones E Información De Garantía

Fig. 4
NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
• To turn the air cleaner on, press the ON/OFF
When the air cleaner is on, the LED light in the ON/OFF button on the control panel
will be lit and the air cleaner will start to operate on LOW speed.
• Once the air cleaner is ON, press the + button to increase the fan speed to the
MED. setting. Press the + again to increase the fan speed to HIGH setting. To
decrease the fan speed, press the – button until your desired setting is reached.
The fan speed setting is indicated by the LED ring around the fan icon.
• To turn the air cleaner OFF, simply press the ON/OFF
control panel.
2. Timer
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours,
and 12 (twelve) hours. To activate the timer press the + button on the control panel
under the TIMER LED screen. Each time the + button is pressed, it will display the
successive settings. To return to a setting already passed, press the – button. Once a
timer setting has been selected, it will remain displayed on the LED screen. To operate
continuously, cycle through all timer settings until no timer setting is displayed.
3. Oscillation
To activate the oscillation, press the
second time.
4. Place the tabs at the bottom of
the grill plate into the base of the
unit. Gently push the grill plate
back into place until you hear
a click sound indicating that the grill
is firmly latched. Fig. 4
Connect the power cord into a
standard AC outlet.
button on the control panel.
button on the
button. To stop oscillation, press the button a
8

Cleaning and Maintenance

We recommend that the air cleaner be cleaned at least once a month and before
storage.
• Turn the air cleaner OFF at the main switch and unplug it from the outlet.
• Use a dry cloth to clean the external surfaces of the air cleaner.
• The grill plate may be cleaned with a damp cloth or the brush attachment of your
vacuum cleaner.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION
Clean Filter Indicator
The air cleaner is equipped with a CLEAN FILTER indicator to let the user know when it
is time to clean the HEPA filters, about every 480 hours of use. When the HEPA filters
are ready to be cleaned, the LED CLEAN FILTER indicator will light up on the control
panel.
If the air cleaner is used daily, we recommend cleaning the HEPA filters more
frequently.
Once the HEPA filters have been cleaned, press and hold the CLEAN FILTER button
until it beeps to reset the Indicator.
9