Hotpoint Ariston FTCD 871 Serie Manual De Instrucciones página 10

The Display
Timed drying
GB
Each press reduces the time duration and number of available time options depending on the programme/material
selected.
The Timed Dry icon
The selected time remains displayed after the programme starts, but can be changed anytime you wish.
Delay and Time to End
Some programmes can have a delayed start (see
Start and Programmes). Press the
button and the icon fl ashes.
Each press of the Delay button
delay setting in 1 hour increments, from:
to ,then
seconds cancels the delay.
The delay time is shown on the display next to the Delay button.
The display counts down the minutes of the delay period after the Start/Pause button
display shows
STARTS IN
You can change or cancel the delay time selected anytime if you wish.
After the Start/Pause button is pressed the Delay or Time to End is displayed in hours and minutes and counts down each
minute.
Time to End
After the delay period fi nishes, or for all the programme if delay not selected, this part of the display will show:
- the estimated time to the end of the programme, for automatic programmes
- the actual time remaining during a timed programme
When timed programmes are selected the time displayed throughout the cycle is the actual time remaining.
When Automatic programmes are selected the time displayed is an estimate of the time remaining. When the programme is
selected the display shows the time required to dry a full load. The time remaining is constantly monitored during the drying
cycle and is updated to show the best forecast.
The colons between the hours and minutes in the display fl ash to show the time is counting down.
My Cycle button:
First time you press this button the display will show
After selecting your favorite programme and options you can save these settings by pressing and holding in the My Cycle
button for at least 5 seconds, the top line will show a fl ashing M followed by the selected programme. The
buzzer will then beep and the second line of the display shows
The next time you need this programme press the M, button, then the Start/Pause button
If you wish, you can change your stored favorite, by selecting a new programme and/or options and press and hold
in the M button (as above).
10
is displayed next to the time..
, Delay
advances the
and then after a couple of
After selecting a programme that has a Timed Dry
option, press the Timed button and the display will
increment the selected time, each time you press and
release the button (see Start and Programmes).
PRESS AND HOLD TO STORE
MEMORY
is pressed. The second line of the
(and this programme will run.