Setting A Parameter - CARLO GAVAZZI EM111 Instrucciones De Instalacion Y Uso

Setting a parameter

s 2
x3 x2
s 1,5 s 1,5 s 1,5
NO OK
OK
Fig. 12
Procedure example: how to set P int=24.
NOTE: the first displayed value is the current one. Settings are applied when the value is confirmed. The set value
is out of range if Error appears. After 120 s of disuse on a value being set, the title page is displayed (P int in the
figure). After another 120 s, the initial measurement page is displayed.
8021438 | EM111 ©2014 | CARLO GAVAZZI Controls SpA| 4