Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up the TV with your PC
How to Auto Ad_
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
Change to the PC mode first.
1
Pressthe MENU button.
Press the 4 or I_ button to select Setup, then press the ENTER button.
Press the A or T button to select PC, then press the ENTER button.
2
Press the A or T button to select Auto Adjustment, then press the ENTER button.
The message Auto Adjustment in progress. Please wait. appears on the screen and the
picture adjustments are automatically activated.
Adustin
the Screen Qualit
The purpose of the picture quality adjustment is to remove or reduce picture noise, If the noise is not removed by fine tuning
alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Change to the PC mode first.
3
Press the A or T button to select image Lock, then press the ENTER button.
Press the A or T button to select Coarse or Fine, then press the ENTER button.
Press the 4 or _,-button to adjust the screen quality, then press the ENTER button.
This feature may change the width of the image, if necessary, adjust the position to
center.
Select Return by pressing the A or _' button, then press the ENTER button to return to the
previous menu.
Continued...
Publicidad
