Resolution Of Problems With The Electric Drive Mechanism - Corradi EXYL Manual Del Usario

RESOLUTION OF PROBLEMS WITH THE ELECTRIC DRIVE MECHANISM

PROBLEM
The motor won't start.
The motor starts but the awning won't move.
The awning moves erratically.
The motor won't start.
The motor starts but the awning won't move.
The awning moves erratically.
30 of 109
CAUSE
There is no electricity.
It is not plugged in.
The motor has overheated and the led on the control panel is
lit.
Depleted remote control batteries.
Broken fuse.
Possibly broken belts, or disconnection from drive shaft.
Dirty runners, runners not properly aligned.
There is no electricity.
It is not plugged in.
The motor has overheated.
Problem setting the limit switch.
Possibly broken belts, or disconnection from drive shaft.
Dirty runners, runners not properly aligned.
CORRADI S.P.A. - USER MANUAL - EXYL
CHECKS AND SOLUTIONS
Check the electric current.
Check that the plug is correctly connected to a suitable socket.
Wait 5-10 minutes to allow the motor to cool down. If the
problem persist check the limit switch.
Change the remote battery.
Open the control panel and change the fuse.
Contact dealer.
Clean the runners. Follow instructions in chapter on
maintenance. Realign the runners.
Check the electric current.
Check that the plug is correctly connected to a suitable socket.
Wait 5-10 minutes to allow the motor to cool down. If the
problem persist check the limit switch.
Set the limit switch.
Contact dealer.
Clean the runners. Follow instructions in chapter on
maintenance. Realign the runners.
2 - 04.2011