Leotec L-PAD PULSAR B 3G Manual De Usuario página 21

external connection USB flash drive
1.7 RESET
Remark: unless unable to shutdown, otherwise don't use the reset, suggest you to shutdown by
normal, or it will easy to damage the machine system.
1.8 Connecting the battery charger.
Attention: ONLY USE THE CHARGER SUPPLIED BY THE MANUFACTURER or ANY
APPROVED BY THE SAME.
First use - Battery management and charge
Attention: ONLY USE THE CHARGER SUPPLIED BY THE MANUFACTURER or ANY
ACCREDITED BY THE SAME.
Note: This device has an internal lithium battery. The charge must be performed via USB
connected to a computer or standard USB adapter supplied (Input: AC110 ~ 240V 50/60Hz Max:
180mA .. Output: DC 5.0V/2.0 A).
To prolong battery life, we suggest you let the battery discharge by using it regularly.
1.9 Inserting and removing the SIM card: with the tablet off, remove the back cover on the
side of the tablet. Insert or remove the SIM card.
IMPORTANT: Make sure the tablet is turned off, otherwise you may damage your SIM card.
2. Connection with PC
Use USB cable to connect device to PC, device will pop up the USB connection window,
clic Turn on USB storage to connect to PC
Once connected click on the USB icon that appears at the bottom right of the screen:
The device enables users to access the screen to
activate the USB storage as shown in the following screen:
Into the load mode, you can copy, delete the file on the device
and the file on the memory card.
3. Main interface describe
After startup will enter the main interface
21