Ezviz CS-A1-32W Guia De Inicio Rapido página 10

Remote Control Basics
Emergency Button
At-Home Mode
Name Description
LED Indicator
Flicker when any button is pressed.
Hold down the button for 2 s to send an emergency alarm to the EZVIZ platform.
If anyone is at home or you are going to enter the house, you need to disarm the alarm
system. Press the button to activate the At-Home mode.
When you are at home and still want to feel protected: only the perimeter parts of the
house (doors and windows) are armed. The Sleeping mode is appropriate during the
day or at night. Press the button to activate the Sleeping mode.
If no one is at home, you need to activate the alarm system to protect it from
intruders. The Leaving-Home mode is appropriate. Press the button to activate the
Leaving-Home mode.
Press to turn off the voice prompts.
• The remote control in the package is connected to the A1 by default. Refer to step 3 in the
Operation to connect another remote control to the Alarm Hub if the remote control does not
work normally or you have a new one.
• The above descriptions for arming mode are the default settings. You can customize the
detectors arming status in each arming mode and switch the arming mode in the EZVIZ app.
LED Indicator
Sleeping Mode
Leaving-Home Mode
Mute
6