Tripp-Lite PDU3VSR6H50A Manual Del Propietário página 13

Using the Digital Display
These options are only available when a sensor such as Tripp Lite's ENVIROSENSE is attached
(sold separately). Press Mode button to toggle between options and data within a menu. A
momentary press of the arrow buttons switches between menus. A long press skips between
measurement categories. The scrolling pattern of the display is outlined below.
Scrolling Through Temperature Readings (Measurement Category)
Temperature (T)
4 0
5 i
Temperature Unit Options (Configuration Category)
C – F
C
Press Mode button to toggle between options and data within a menu. A momentary press of the
arrow buttons switches between menus. A long press skips between measurement categories.
The scrolling pattern of the display is outlined below.
Scroll Function Options (Configuration Category)
Y
13-09-017-9332B8.indb 13
Humidity (%RH)
8 0
5 i
C – F
3 Seconds
F
Hold Mode button for 3 seconds to
switch between options. The letter
in the 2-digit display indicates the
selected unit, C for Celsius and F for
Fahrenheit.
When enabled, the Auto Scroll
function displays data for
Input Phases, Load Unbalance
and Load Banks in 4-second
intervals. Y indicates the
function is enabled; N indicates
that it is disabled. Pressing any
button interrupts the auto scroll
function, allowing the user to
navigate between menu options.
If no button is pressed, there is
a 10 second timeout.
Note: Hold Mode button for 3
To LED
seconds to switch between options.
Bright-
The letter in the 2-digit display
ness
indicates the selected option.
13
9/5/2013 4:26:54 PM