Using The Area Shot Mode; Switching Between Guidance Points; Re-Scrolling Through Text Information; Changing Area Shot Screens - Fujitsu Ten Eclipse CD3000 Manual Del Propietário

Various Settings
CAUTION
• Modes may not be changed if guidance
data has not been imported properly.
• Do not look at the screen while driving.

Using the AREA SHOT mode

By manually switching between guidance points,
both previous and next guidance points can be
confirmed during guidance. Intersection street
names and the direction of turns are shown on
the display in text and with arrows.

Switching between guidance points

After passing each location described in the
guidance, it is necessary to switch manually
to the next guidance screen. The previous
screen can also be accessed manually and
confirmed.
Press the [
1
switch between guidance points.
[ ] button:
Switches to the next guidance point.
[ ] button:
Switches to the previous guidance
point.
Re-scrolling through text
information
Text information including intersection street
names and turn directions can be scrolled
across the screen.
characters can be displayed on a single
screen. Excess characters are scrolled on the
display. When scrolling is complete, the first
nine characters are once more displayed on
the screen. To re-scroll perform the following
operation:
1
Press the [DISP] button.
Guidance information can be re-
scrolled.
34
] or [ ] button to
A maximum of

Changing AREA SHOT screens

In the AREA SHOT mode, the audio screen
can be accessed.
1
Press the [RTN] button.
Pressing the button repeatedly allows
you to switch back and forth between
the AREA SHOT screen and the Audio
screen.
● Note ●
• The distance
previous
intersections is displayed on
the screen in miles ("mi") for
US model and in kilometers
("km") for Australia model.
9
between
and next turn
a