Basic Operations; Information Display; Mute Function - Lenco DVT 1946 Manual De Usuario

Make sure all necessary connections are correctly
connected before turn on the power.
The power indicator turns red and the unit is in the standby
mode.
Turn on the power
Press [z] to turn on the main unit.
The power indicator turns blue.
Turn off the power
Press [z] again can turn off the main unit.
The unit is automatically set standby mode.
The power indicator turns red.
Using the Sleep Timer
The sleep timer automatically switches off the power after a
preset time has elapsed. There are 9 time periods available,
press [SLEEP] on the remote control repeatedly to
select the desired sleep time:
0 Min v 15 Min v 30 Min v 45 Min
v60 Min v 75 Min v 90 Min v 105 Min v 120 Min
(The sleep timer starts when the setting is fi nished.)
To check the remain sleep time
Press [SLEEP] on the remote control, the remain sleep time
appears on the screen for a few seconds.
Select the TV channel
After selected "ATV" or "DTV" as input source, you can do
either one of followings to select your channel.
Note: If you choose "DTV" as the input source, insert the CI
card (supplied by your local server) to the CI insert slot.
VOL CH CH MENU
• Press [o CH] or [CH p] (or [-PROGRAM]
or [PROGRAM+] on the main unit).
• Press [0, 1~9] to input the channel
number directly.
• Press [ ] to go back the previous
channel you've watched last time.
Selecting the picture mode
Press [P.STD ] repeatedly on the remote
control to select the desired picture mode.

BASIC OPERATIONS

SOURCE
ASPECT
Select the input source
Turn on the connected necessary external
device. Press [SOURCE] to select the
proper input source.
The input source menu appears.
1. Press [o/p] to move the high-lighted
bar to the desired source item.
2. Press [OK] ( or [b/a] )to confi rm.
Information of the selected source name appears on the TV
for a few seconds.

Information display

Press [INFO] on the remote control, the related
information of current source appears on the screen
automatically.
Adjusting the volume
Press [- VOL] to reduce the volume.
Press [VOL+] to increase the volume.
VOL VOL
NICAM Function
Press [I/II] on the remote control when input source is "TV".
This operation do no effect to the channels without NICAM
signal.
Once [I/II] is pressed, it alternates in the different sound
options such as mono, stereo, dual I, dual II.
Selecting the audio language
For some programs with audio language options,
once [AUDIO] is pressed, it alternates in the
different audio language options.

Mute function

Press [MUTE
the sound temporarily.
Press this button again (or [VOL+], [VOL-]), the
sound comes back.
TITLE
Selecting the sound mode
Press [S.STD
select the desired sound mode.
E8
CH MENU SOURCE
] on the remote control to switch off
] repeatedly on the remote control to
ATV
SCART
CVBS
S-VIDEO
VGA
HDMI
DVD
DTV
AUDIO