The Tv Anywhere System; Installing The System - Marmitek TV ANYWHERE Modo De Empleo

1. THE TV ANYWHERE SYSTEM

The TV Anywhere system includes a transmitter with built-in tuner and a receiver for antenna
signals and A/V signals. With the TV Anywhere system, you can transmit audio and video
signals throughout your house to a remote (2nd) TV, without additional coaxial cables. The
built-in tuner converts the antenna signal into a standard audio/video signal. This A/V signal
is transmitted by the unit on a 2.4 GHz or 5,8 GHz frequency (model dependend). The TV
Anywhere transmitter can be connected directly to your antenna wall socket. The receiver is
connected to the A/V input of your remote (2nd) Television.
Applications: Place your TV wherever you want, without having to worry about the
location of the aerial point.
RADIO/ TV
See chapter 2.1
Multisource and remote control
Additional A/V equipment can be connected to the transmitter as well (e.g.Set-Top Box, DVD player
or satellite receiver). The source can be selected with the remote control supplied, even from another
room. The supplied remote is a 6in1 universal remote and can be used locally (for your connected TV)
as well as for various other equipment (e.g. DVD, Set-Top Box, satellite receiver, etc.) connected to the
transmitter in another room. This remote control is also used to select channels on the TV Anywhere.
The TV Anywhere has a built-in IR (infrared) extender to use your original IR remotes as well.
Extra connections for a settop box, satellite receiver, decoder, HDD recorder, DVD player etc,.
TV1
TV2
RADIO/ TV
SAT / HDD / SETTOPBOX / DVD
See chapter 2.2

2. INSTALLING THE SYSTEM

Attention: During set up, install the TV Anywhere transmitter and receiver in the same room
with a TV connected. After successful installation the receiver can be placed to wherever you
wish to connect your remote (2nd) TV.
4 © MARMITEK