Installing The System; Installing The Transmitter Without Extra Equipment; Installing The Transmitter With Extra Equipment - Marmitek TV ANYWHERE Modo De Empleo

4. Installing the system

Attention: Because of technical reasons, you need to place the TV Anywhere
transmitter and receiver together when installing the system. After finishing the
installation you can move the receiver to wherever you wish to connect your TV.
During the installation the receiver needs to be connected to a (random) TV.
You can connect the TV Anywhere in two different ways. Do you own a satellite receiver, VCR
or DVD player? In that case, use method 4.2 to connect your TV Anywhere. Do you not have
this type of equipment? Then use method 4.1 to connect your TV Anywhere.
4.1 Installing the transmitter
without extra equipment
1. Connect the coaxial cable
supplied [C] to your antenna
wall socket.
2. Connect the coaxial cable to
the Antenna Input [3] of your
TV Anywhere transmitter.
3. Select a channel using the
Channel Selector slide switch
[9], e.g. C.
4. Connect the large power adapter (12V) to the TV Anywhere transmitter [6].
5. Switch on the power [7].
6. Make sure the TV Anywhere transmitter is placed some distance away from other items.
Do not place the transmitter on top of your audio and/or video equipment. Direct the flat
2.4 GHz antenna [K] at of the receiver.
4.2 Installing the transmitter with extra equipment (such as a satellite
receiver, VCR or DVD player)
This setup allows you to watch all sources both in the main room and the second room.
1. Connect the antenna splitter [A] to the aerial connection of your TV.
2. Connect the supplied coaxial cable [C] to one side of the antenna splitter [A].
3. Connect the other end of the coaxial cable [C] to the antenna input [3] of the TV
Anywhere transmitter.
4. Connect the existing coaxial cable (from your satellite receiver or VCR) to the other end
of the splitter.
5. Connect the audio/video output [F] from your DVD player to the audio/video input [4] of
the TV Anywhere transmitter [MultiSource function]. An RCA/RCA cable [G] is supplied.
6. Connect the audio/video output [5] of the TV Anywhere transmitter to the audio/video
input (SCART) [I] of your TV. To make this connection, you can use the cable you
originally used for connecting your DVD to your TV.
7. Insert the plug of the infrared extender cable to the output [2] on the TV Anywhere
transmitter.
6
3
C
RADIO TV
A
TV
SCART
© MARMITEK