Use
7.2 Oven
CAUTION!
The burner must only be ignited when the door is fully open.
The rack, drip pan (tray) or the pan must be positioned in the oven
in a way that they are not directly in contact with the flames.
If the burner flame accidentally goes out, close the gas knob and
wait a minute before relighting.
Electronic ignition of the oven
OG2000
To generate the flame, fully press down the control knob and turn it from
h
position 1 to 6 (Fig. 6, page 6). Simultaneously push down the
electronic ignition button.
OG3000
To generate the flame, fully press down the control knob and turn it from
h
position 1 to 6 (Fig. 6, page 6).
Once the flame has been generated, press the knob down for a few
h
seconds so that the flame remains lit.
CAUTION!
If the burner does not turn on:
● proceed with manual ignition;
● check that there is gas in the cylinder.
If the device does not work, close the gas inlet tap and contact
your dealer.
36
OG2000 - OG3000
EN