Playing Files - Gemini DRP-1 Manual De Instrucciones

SD Card Connection
The DRP-1 comes with a 1 GB SD card which
stores the recordings. Before turning on the
unit, ensure the card is inserted into the slot
(15) located on the front of the DRP-1. To
connect the card, push the card completely in
the slot until it clicks into place.
Note: DO NOT FORCE THE CARD IN. To
remove the card, slightly push the bottom
of the card. It will slide out partially, and
then can be pulled out.
Using the USB Drive
On the front of the device is a USB drive slot (16) where a USB
memory stick can be connected. The DRP-1 can both read
files for playback and record directly to a USB device con-
nected to this area.
The DRP-1 unit will only interact with one memory device at a
time, and the USB drive gets priority over the SD card. What
this means is that when a USB memory stick is connected,
only files stored on that device will be viewable. As well, all recordings
will be stored on just the USB drive when it is connected.
When there is no USB drive connected, the DRP-1 uses the SD card to
read files and store recordings.
Turning on the Unit
Now that the SD card and power source are connected, the unit can
be turned on by setting the POWER (1) button.
Connections and System Control
7
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
Navigating the DRP-1
After the unit is turned on, a menu appears listing all of the files and
folders on the memory device. Use the RECORD LEVEL/SEARCH (11)
jog wheel to scroll through these folders & files.
Scrolling clockwise will search downwards through the file menu &
scrolling counter clockwise will search upwards. Press PLAY/PAUSE
(13) when a folder is highlighted to view its contents. All recordings
are stored in the folder labeled RECORDS in the Gemini menu. Press
the STOP/BACK (12) button to return to the previous folder.
Insert card the way

Playing Files

it is shown
To engage a file, press the PLAY/PAUSE button when it is highlighted
in the file menu (*Note: When connecting a new card no files will be
viewable as no media is yet on the device).
Pressing this button again will pause the playing file. To fast-forward
within a track, scroll the RECORD LEVEL/SEARCH jog wheel
clockwise. Conversely, to rewind, scroll the jog wheel counterclockwise.
To stop a file that is playing and return the unit to the file menu, press
the STOP/BACK (12) button.
Play Mode
File number
SD card usage
File name
Track Display
(Unit in Play Mode)
P R O A U D I O
File format
Track time
Time mode