Resetting The Counter - Xerox Phaser 5335 Guía De Instalación Del Kit De Mantenimiento

Resetting the Counter

If you are finished installing the maintenance kit, reset the counter on the control panel.
1. Press the
control panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
Note
• If you went past the desired item, return to the item by
pressing the <
3. Press the < > button to move to the lower
hierarchy.
Press the < > button until [Maintenance
Mode] is displayed.
4. Press the < > button.
[Reset Counter] is displayed.
5. Press the < > button to select
[Maintenance Kit].
6. Press the < > button.
[Use OK to Reset] is displayed.
7. Press the
The resetting of the counter starts. When
finished, the display returns to the screen
shown on the right.
8. Press the
the [Ready to print] screen.
10
<Menu> button on the
> button.
<OK/Eject> button.
<Menu> button to return to
Menu
Print Language
Menu
Admin Menu
Admin Menu
Maintenance Mode
Maintenance Mode
Reset Counter
Reset Counter
Maintenance Kit
Maintenance Kit
Use OK to Reset
Reset Counter
Maintenance Kit