Xerox Phaser 5335 Guía De Instalación Del Kit De Mantenimiento página 8

3. Pull up on the tab of the feed roll on the
shaft to unlock the feed roll, and slide the
feed roll off of the shaft.
4. Install the new feed roll. Slide the feed roll
from the side with the short tab first.
5. Align the short tab of the feed roll with the
indentation on the shaft, and push the feed
roll firmly onto the shaft.
6. Close the roll cover, pushing the tabs on
both sides until the tabs are firmly locked.
Continue with the following procedure to replace the two feed rolls inside the printer.
7. Identify the location of the feed rolls. There
are two orange feed rolls on the upper side
of the tray slot.
8
short tab
long tab