Procom QEB100 Manual De Usuario página 12

INSTALLATION - CRHQD250T, Q SERIES, B23 SERIES,
PCSD25RT, CRHSD25RT AND FBD400 SERIES
15. CRHQD250T, Q Series and BD32 Series
Remove screws securing front log bracket
and control panel (see Figure 31a).
CRHSD25RT and PCSD25RT Remove
screws securing control panel (see Figure
31b).
FBD400 Series Remove screws securing
control panel (see Figure 31c).
Figure 31a - CRHQD250T, Q Series and
BD32 Series Log Bracket and Control Panel
Figure 31b - CRHSD25RT and PCSD25RT
Control Panel
Figure 31c - FBD400 Series Control
12
Panel
www.usaprocom.com
16. BD23 Series Remove screws securing
control panel door (see Figure 32).
Figure 32 - BD23 Series, Control Panel
17. Feed the AUTO, OFF, MAN connectors
through the rocker switch hole on the left
side of the control panel (see Figure 33).
Figure 33 - Inserting Rocker Switch
Wires (Hole Location Varies by Model)
18. Connect the AUTO, OFF, MAN wires to
the three corresponding male tabs on the
rocker switch (see Figure 34).
Rocker Switch
Figure 34 - Connecting Wires to Rocker
Switch
Door
AUTO
OFF (O)
MAN
200070-01A