Novik Neo IMPACT ONE Manual De Instrucciones página 10

WIRELESS MICROPHONE FUNCTION INSTRUCTION
1. Open battery cover, please notice the place of positive & negative pole when put in the batteries.
2. Turn on Microphone power switch to ON, if power indicator light not flash or constant on, please
check voltage of the power maybe not enough or battery contact wrong pole.
3. Adjust the knob on the speaker for the microphone, according your need to adjust the volume.
4. Adjust volume when use wireless microphone to sing.
5. When switch on wireless microphone, power indicator light will flash, indicates the power of the
battery is low, please replace new batteries as soon as possible.
CHARGING STATEMENT
Charging period should be 6-8hours, please pull off the adapter after full charged. It may caused
battery damaged after charge long-time (charging indicate light will keep flashing during charging,
flashing will be stopped after charging finished.)
Note: Please charge in-time if battery do not have enough power. Must be sure battery has power if
do not use the appliance for long time, otherwise will cause battery damaged.
TROUBLESHOOTING
The device does not turn on
There is no sound
The sound is weak, distorted or noisy
10 www.novikneo.com
• Is the device connected to an appropriate alter current net
through the voltage wire provided by the manufacturer?
• Is the switch on?
• Are the wires correctly connected?
• Is the audio signal received in the loudspeaker?
• Is the level control correctly adjusted?
• Has the input signal the correct level to enter in
• Are the wires damaged?
• Move the wires and keep them far from noise sources.
• Move the monitors and the wires of any device that can
produce interferences (cell phones, transformers, etc.)