Important Safety Instructions - Bestway 58435 El Manual Del Propietario

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
The batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
NOTE:
This device complies with Part 15 of the FCC Rules / Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MPE Requirements
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons
during device operation.
To ensure compliance, operations at closer than this distance is not
recommended.
Region Selection
Limited by local law regulations, version for North America does not have region
selection option.
Specification
DC 5V 2.4A
Max. ambient: 113°F (45ºC)（Operation temperature)
Max. altitude: 2000m (For normal use)
P61623
P61621
P61626
S-S-004503/14.0x21.0cm (#58435 SPA多功能外罩说明书) JS-YF-2016-B-03604/英
WARNING
P61628 P61625
P61624
ASSEMBLY
CHARGING
LED strip connection
NOTE: LED strip (not included)
only for SPA Paris
OPERATION
Press once: Power on/
press again: power off
Previous song
Volume adjust
Bluetooth
Press once：Blue light will flash which indicates it is searching for a pair of
equipment.
Turn Bluetooth on your cell phone and search for the sound box device named
SPA-01.
Press and hold for 3 seconds： It will disconnect the originally connected
Bluetooth device. Meanwhile, a blue light will flash which indicates a search
for the next pair of equipment.
NOTE: When switching on the POWER button, if the Bluetooth does not
connect with any device, the Bluetooth will shut down automatically after 15
minutes (the blue light of Bluetooth will dim out, and the red light below power
button will be on). To turn on the Bluetooth, push Bluetooth button again.
NOTE：
- Do not use this product with the spa when charging.
- When charging the battery, the device will not cut off the supply from built-in
battery.
- When the battery capacity reaches the limit value at about 20%- 6.8V, the
power indicator red lights flashes.
- When the battery capacity reaches the limit value at about 15%- 6.4V, the
sound box begins to beep and red light flashes.
- When the battery voltage is lower than the normal value of 6V, the sound box
beeps fast, and then automatically shuts down into standby mode.
- Do not use any other charging device to charge the product. Damage due to
other charging devices is not covered under warranty.
- The compartment on the sound box is not waterproof. Please use at own risk.
- If there is water inside the speaker, turn it upside down to drain out any
residual water.
STORAGE
If you cannot turn on the device after storing for a long time, please charge on
to meet the minimum requirements first.
2
Charging: Red light is on
Charged: Green light is on
Press the Power button,
and the station will begin
to supply power to your
LED strip.
PLAY/PAUSE
Accept / Hang up incoming
calls
Next song
Bluetooth
S-S-004503